Complex geometries and freeform surfaces in fewer set-ups, with simultaneous 5-axis machining when the part calls for it.
Precision CNC machining
3-, 4- and 5-axis turning and milling for prototypes, short runs and critical parts, for companies in Spain and Europe.
What we machine
We analyse your drawing and choose the machine, tooling and cutting strategy before manufacturing. We turn rotational parts and mill on 3, 4 and 5 axes, from a single prototype to series of several hundred units. If the part needs a prior review, it goes through engineering and DFM; final verification relies on our dimensional inspection.
Prismatic parts: faces, pockets, bores, holes and threads, to tight tolerances.
Internal cavities, sharp edges and shapes that cutting tools cannot reach.
Roughness to drawing. What can be achieved in each material is validated before manufacturing.
5-axis machined propeller
Simultaneous 5-axis milling and verification with a 3D laser scanner.
How your part is made
Briefing
We review the drawing, material, quantity and critical dimensions with you before quoting.
Machining
We programme the strategy in CAM and machine in the axis configuration the part requires.
Verification
We measure the critical dimensions on the finished part.
Report
We deliver documented dimensional inspection, with an FAI or PPAP report when the sector requires it.
Materials we work with
316L stainless
Precision finish on stainless steel.
7075 aluminium
Machined and anodised.
TUFCOT T100
Self-lubricating technical material.
Also steels and titanium. Achievable tolerances depend on the material and geometry, so we validate them at the DFM stage, before cutting.
What you receive with every part
The part to drawing, with dimensional verification, an EN 10204 3.1 material certificate, individual labelling with order and batch number, and technical packaging. The FAI report is supplied on request and PPAP in regulated sectors.
To request a quote, send the drawing as PDF and the model as STEP or DXF through our quote request form. We work for the automotive, energy, marine, rail and heavy industry sectors.
Frequently asked questions
They depend on the material, geometry and process. That is why we validate them at the DFM stage, before manufacturing, based on your drawing rather than a generic figure.
From a single part or prototype up to series of several hundred units. If you need higher volumes, tell us about the project and we will look into it.
Yes: steels, stainless steel, aluminium, titanium and technical materials. Each one has its own cutting, cooling and verification strategy, which we define before machining.
We respond within 24 working hours of receiving the drawing, with a technical analysis of the part.